2022 Ryan 554913C

$3,529.00

$3,529.00

Key Features

New/Used New
Usage0 Miles
Availability In Stock
LocationStephen Roy Power Equipment
VIN 554913C06627
Condition Excellent

Product Features

Description

TESTED. TRIED. PROVEN



With Easy Steer Technology, the Lawnaire IV & V maneuver around highly landscaped areas fast and efficiently. Designed to rotate independently while driving, innovative tine assemblies allow you to steer without removing the tines from the ground—opening up a whole new world of productivity.

Build Features
  • 3/4" (19mm) Diameter Steel Coring Tines: Unlike everyone else, our hardened alloy steel coring tines stay in the ground when you turn-and durable enough to keep you out on the turf and out of the shop.
  • Front Bumper Guard: Feel confident with your investment with a sturdy front bumper guard, protecting vital components from accidents and mistakes.
  • Flexible Weight Distribution: Get the exact down pressure and weight distribution you need by attaching or removing weights or adding water to the front drum.
  • Size up Your Needs: Facing tight terrain and landscaping? The Lawnaire IV fits with its 19-inch aeration width. Need to maximize your productivity? The Lawnaire V has you covered with 26.5-in aeration width.
Capabilities Features
  • Easy Steer Technology: Save your strength with Easy Steer Technology and easily maneuver along paths and contours or when pulling off a 180° turn. Outer tines rotate faster during turns to maintain deep core penetration without tearing up turf, increasing your productivity without sacrificing quality.
  • Lifting and Transporting Made Simple: Remove weights to make it easier to lift. Or fold up its handles to make it compact for small trailers. Or remove rear wheels if you’re in a tight space. Durable and lightweight, this machine transports from job to job with ease.
Power
  • Engine Model: 4-cycle Honda® GX120; recoil start; on/off switch; low-oil alert
  • Displacement: 7.2 cu in. (118 cc)
  • Fuel Capacity: 0.53 gal. (2 L)
  • Oil Capacity: 0.59 qt (0.56 L)
Unit
  • Clutch: Belt tightener
  • Drive: Primary: 4L section V-belt
  • Drive: Tine & Drum: Single #40 nickel-plated chain
  • Tines: 0.75 in. (19 mm) diameter coring type formed from 0.08 in. (2 mm) hollow, hardened alloy steel;
  • Number of Tines: 30 tines per aerator
  • Lubrication: Grease zerks on the wheels & idler pivot / oil chain
  • Coring Depth: Up to 2.75 in. (70 mm)
  • Core Diameter: 0.75 in. (19 mm)
  • Aerating Width: 19 in. (483 mm)
  • Aeration Pattern: 3.75 in. x 7 in. (95 mm x 178 mm)
  • Holes per Sq Ft: up to 9 sq ft (.5 m2)
  • Productivity: Aerates up to 29,000 sq ft/hr (2,694 m2/hr)
  • Tires: (2) 8x2.25 semi-pneumatic w/ball bearings
Dimensions
  • Weight: Wet w/o Weights: 220 lb (100 kg)
  • Weight: Wet w/Weights: 261 lb (118 kg)
  • Weight: Wet w/Weights and Water in Drum: 304 lb. (138 kg)
  • Width: 28 in. (711 mm)
  • Length: 53.5 in. (1,359 mm)
  • Height: 48.8 in. (1,240 mm)
NOTES:
Specifications subject to change without notice.

Machine

Coring Width 19 in. (483 mm)
Coring Depth Up to 2.75 in. (70 mm)
Hole Pattern 3.75 in. x 7 in. (95 mm x 178 mm)
Height 48.5 in. (1,232 mm)
Weight 220 lb. (100 kg)
Width 28 in. (711 mm)
Length 53.5 in. (1,359 mm)

Productivity

Square Ft/Hr Maximum Aerates up to 29,000 sq ft/hr (2,694 m2/hr)

Engine

Engine Manufacturer Honda®
Engine Type 4-cycle GX120; recoil start; on/off switch; low-oil alert
Engine Size 7.2 cu in. (118 cc)

Shopping Tools